Tips & Troubleshooting for Noxxa BreadMaker Oven Toaster

Owning the Noxxa BreadMaker Oven Toaster and using it to either bake delicious bread and cakes, cook meals using the oven function and toast scrumptious garlic bread is one thing, but keeping the appliance clean and functioning properly is quite another.

Tips & Troubleshooting for Noxxa BreadMaker Oven Toaster

Cleaning (Always unplug unit)

Any servicing requiring disassembly, other than the cleaning described below, must be performed by an authorised service representative. Unauthorised service will void your warranty. To assure optimum safety, keep unit clean, free of grease and food buildup.

• Avoid using any cleaning agents other than dish detergent.
• Do not use steel wool or other abrasive materials.
• Do not wash any parts in the dishwasher.
• Clean bake/broil pan, wire rack and cover with a mild non-abrasive cleaner and a plastic scouring pad. Rinse and dry thoroughly.
• Wipe the shaft of the bread pan with a soft cloth or sponge to prevent damage to the seal packing. Allow to dry before storing the pan inside the machine.

Removing the Kneading Blade

• After each use, upon removing the kneading blade, fill the pan with hot soapy water and allow it to soak for up to 30 minutes. Wash it with a nylon bristle brush or cloth and dry thoroughly.

Bread Pan Tips

• DO NOT IMMERSE the bread pan in water. Fill the pan with hot soapy water and allow it to soak for up to 30 minutes. Wash it with a nylon bristle brush or cloth and dry thoroughly.
• Do not place bread pan in a conventional oven.
• Do not use metal utensils inside the bread pan. They will damage the non-stick coating.
• The non-stick coating may change colour over time. This is caused by moisture and steam, and in no way affects performance.

General Appliance Tips

• Wipe the exterior with a damp dishcloth after each use.
• Do not immerse the appliance in or splash with water.
• After using, cool and wipe out the oven interior with a damp dish cloth or plastic scouring pad. Do not rub too hard as the surface can be scratched.
• Clean door glass with glass cleaner or mild detergent using a damp cloth or plastic scouring pad.
• Rinse and dry thoroughly before closing door.

Storing

• Be sure the BreadMaker oven is completely cooled before storing.
• All removable parts should be thoroughly cleaned and dried.
• Store with door closed.

Frequently Asked Questions

1. Why does the height and shape of bread differ in each loaf?

The height and shape of bread may differ depending on the ingredients, room temperature and length of the delay programme. Also, accurate measurement of ingredients is essential to make delicious bread.

2. The bread has an unusual aroma. Why?

Stale ingredients or too much yeast may have been used. Always use fresh ingredients. Accurate measurements are essential to make delicious bread.

3. The kneading blade comes out with the bread. Why?

This can happen as the kneading blade is detachable. Use a non-metal utensil to remove it.

Caution: The kneading blade will be hot.

4. The bread has a floured corner. Why?

Sometimes flour in the corner of the bread pan may not have been completely kneaded into the dough. Scrape it off with a knife.

5. Why can the timer not be set for more than 13 hours?

Longer delay times could alter the baking results.

6. Can ingredients be halved or doubled?

No. If there is too little in the bread pan, the kneading blade cannot knead well enough. If there is too much, bread swells out of the bread pan.

7. Can fresh milk be used in place of powdered milk?

Yes. Be sure to deduct the same measurement of water to equal liquid substitution. Fresh milk is not recommended when using the delay programme, because it may spoil while sitting in the bread pan.

Don’t own a Noxxa BreadMaker Oven Toaster? It’s time you do!